volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing oil level and oil temperature sender > < Removing and installing oil pump, engine codes CFFA, CFFB, CFGB, CFFD, CLLA, CLJA

Golf Mk6

Removing and installing oil pump, engine codes CFHB, CFHC, CFJA, CLCA
Removing and installing oil pump, engine codes CFHB, CFHC, CFJA, CLCA
   
Removing
–  Remove sump → Chapter.
–  When oil pump is to be renewed, unscrew bolts -4- and remove oil intake pipe -3-.
–  Unscrew bolts -arrows- and remove baffle -2-.
–  Detach oil pump -1- from toothed belt and remove pump.
  A17-10547
Installing
l  Specified torques → Chapter.
Install in reverse order:
  Note
Renew O-ring.
–  Insert new dowel sleeves when oil pump has no dowel sleeves -arrows- for centring oil pump.
–  Check oil pump for ease of movement, turn toothed belt pulley with one finger for this.
  Note
Renew oil pump if sluggish.
–  Check toothed belt for oil pump.
  Note
t  Renew toothed belt if damaged.
t  The toothed belt can sag after long use, this is not a fault.
–  Fit oil pump with toothed belt pulley into toothed belt and tighten along with baffle.
–  Install sump → Chapter.
–  Replenish engine oil and check oil level → Chapter.
  A17-10548

Removing and installing oil level and oil temperature sender > < Removing and installing oil pump, engine codes CFFA, CFFB, CFGB, CFFD, CLLA, CLJA