Volkswagen Workshop Service and Repair Manuals > Golf Mk6 > Power unit | 4-cylinder diesel engine (2.0 l engine, common rail, generation II) | Engine lubrication | Sump, oil pump | Removing and installing oil level and oil temperature sender

Removing and installing oil level and oil temperature sender

Removing

–	Drain engine oil → Booklet.

–	Disconnect electrical connector -3-.

–	Unscrew bolts -1- and remove oil level and oil temperature sender -G266--item 4-.

Installing

l	Specified torque → Chapter „Assembly overview - balancer shaft module “.

Install in reverse order:

Note

Renew seal -2- and self-locking bolts -1-.

–	Replenish engine oil and check oil level → Booklet.

Volkswagen Workshop Service and Repair Manuals