| Exhaust system (Golf, Eos, Scirocco) |
Note | t
| The flexible joint in the front exhaust pipe must not be bent more than 10° - otherwise it can be damaged. |
| t
| Renew seals, gaskets and self-locking nuts. |
| t
| After working on the exhaust system, ensure that the system is not under stress and that there is sufficient clearance to the bodywork. If necessary, loosen clamp and align silencers and exhaust pipe so that sufficient clearance is maintained to the bodywork at all points and the mountings are evenly loaded. |
| t
| The exhaust manifold and the turbocharger are one component. Removing and installing → Chapter. |
| Assembly overview - exhaust system (engine code CAWB) → Chapter. |
| Assembly overview - exhaust system (Golf 2004 ►, Eos, Scirocco, engine codes CCTA, CCZA, CCZB) → Chapter |
| Assembly overview - exhaust system (engine code CBFA) → Chapter. |
| Assembly overview - exhaust system (Golf 2009►, engine codes CCZA, CCZB) → Chapter |
| Assembly overview - exhaust system (Golf 2009 ►, engine codes CCTA, CDAA) → Chapter |
| Separating centre and rear silencers → Chapter. |
| Aligning exhaust system free of stress → Chapter. |
| Installation position and specified torque of clamp → Chapter. |
| Removing and installing catalytic converters with front exhaust pipe → Chapter. |
|
|
|
