volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Removing and installing interior aerial 1 for entry and start authorisationR138 > < Removing and installing rear bumper aerial for entry and start authorisationR136

Golf Mk6

Removing and installing luggage compartment aerial for entry and start authorisationR137
Removing and installing luggage compartment aerial for entry and start authorisation -R137-
The luggage compartment aerial for entry and start authorisation -R137- is located centrally in the luggage compartment before the spare wheel recess.
  Note
Coding, basic setting and adaption are not necessary if the luggage compartment aerial for entry and start authorisation -R137- is renewed. Erase entry created in event memory via „Guided fault finding“ with vehicle diagnosis tester.
Removing:
–  Switch off ignition and all electrical consumers.
–  Remove floor covering from luggage compartment.
   
–  Unclip luggage compartment aerial for entry and start authorisation -R137--1- vertically upwards out of fastener, taking connected wiring length into consideration.
–  Release and disconnect connector -arrow- and remove luggage compartment aerial for entry and start authorisation -R137--1- from vehicle.
Installing:
Installation is carried out in reverse order of removal.
  N94-11820

Removing and installing interior aerial 1 for entry and start authorisationR138 > < Removing and installing rear bumper aerial for entry and start authorisationR136