Golf L4-2.0L DSL Turbo (CJAA) (2010)
Wiper Arm: Service and Repair
Wiper Arms
Wiper Arms
Removing:
-
Wiper arms, removing. Refer to => [ Wiper Arms, Removing ] See: Service and Repair/Removal and Replacement/Windshield Washer System.
Installing:
‹› Only tighten the wiper arm nuts to the specification after adjusting the wiper blade park position.
-
Deactivate APP function. Refer to => [ Wiper Motor Alternating Park Position Function, Deactivating ] See: Wiper Motor/Testing and Inspection
if not already done by this time.
-
With the ignition on, switch the windshield wipers on and off again to move the wiper motor into the park position.
-
Place the wiper arms on the wiper arm shafts in the approximate park positions and tighten the nuts - arrows - by hand.
-
Adjust the windshield wiper blade park position. Refer to => [ Windshield Wiper Blades, Adjusting Park Position ] See: Adjustments/Windshield
Wiper Blades, Adjusting Park Position.