Golf GL L4-2.0L (AEG) (2001)
NOTE:
-
When inserting ensure wide space -a- on joint housing is aligned with narrow space -b- on hub.
-
Chamfer on inner diameter of ball hub (splines) faces larger diameter of joint housing.
-
Install ball hub; hub must be swiveled out of cage (arrows) far enough to allow balls to fit in ball tracks.
Constant velocity (CV) joint, checking
-
Press cage firmly (arrow) until hub swings fully in position.
CV joint is correctly assembled when ball hub can be moved by hand back and forth over its entire axial range.