Golf GL L4-2.0L (AZG) (2001)
High Pressure Sensor / Switch: Testing and Inspection
High Pressure Sensor - G65 -
High Pressure Sensor -G65-, Checking
NOTE:
-
The presence of -G65- is engine dependant. Where -G65- is not used, A/C pressure switch -F129- is used instead.
-
Where -G65- is used, it's wiring circuit varies according to engine application (E.g.: some are connected to the ECM, some are not).
-
Always confirm system use of either -065- or -F129- and applicable wiring circuit using applicable "Engine" and "Air conditioning" wiring
diagrams.
Special tools and equipment required
-
VAG 1767 Ignition tester
-
VAG 1594/A (or C) Connector test set
-
VAG 1598 A Test box
-
Applicable wiring diagram
-
In cases where refrigerant system may need to be recharged, use kent Moore ACR4 (or equivalent) (VAG 1885 illustrated).
-
Where necessary: VAG 1551/1552 Scan Tool
-
Optional: VAS 5051 Vehicle Diagnostic Testing and Information System