Golf GL L4-2.0L (AZG) (2001)
Headlamp Switch: Service and Repair
Light Switch -E1-, Removing And Installing
Removing
-
Turn rotary switch to "0" position.
-
Press rotary part inward -1- and turn slightly to right -2-.
-
Hold rotary part in this position and pull light switch out from instrument panel -3-.
-
Disconnect electrical connection.
Installing:
-
Connect electrical connector.
-
Hold light switch and press rotary part inward -1- and turn slightly to right -2-.
-
Hold rotary part in this position and insert light switch into instrument panel -3-.
-
Turn rotary part to position "0", release and engage switch