Golf GTI V6-2792cc 2.8L DOHC (AAA) SFI (1998)
NOTE: Tool 3186 spring compressor may also be used in place of tool 3078 (shown).
Fig. 2 - Wheel Hub, Pressing Out Of Wheel Bearing Housing
Fig. 3 - Wheel Bearing Inner Race, Removing
-
Only use commercial puller with tensioner, e.g. Kukko 204/2.
Fig. 4 - Wheel Bearing, Pressing Out Of Wheel Bearing Housing
Fig. 5 - Lubricating inner surface of wheel bearing housing
-
Coat completely with MoS2 grease.