Golf III L4-1984cc 2.0L SOHC (1993)
IGNITION CABLE REPLACEMENT
^
Open hood
^
Locate, remove and discard the ignition coil cable and coil cable bracket (if present) close to ignition coil
^
Replace with a new cable -A- from a kit, part number 037 998 031
^
Connect the angled end of the new ignition coil cable to the coil
^
Route the ignition coil cable under the accelerator cable -D- and between spark plug cables for cylinders # 1 and # 3 at the distributor
^
Connect the straight end of the ignition coil cable to the distributor cap
^
Install ignition coil cable holding clip from the kit to the radiator overflow hose -B-
- The clip location must be a minimum of 80 mm (3.12 in.) from cylinder head
- Secure the ignition coil cable to the clip
^
If present, remove and discard the spark plug cable separator located above the distributor cap Route the cylinder # 4 spark plug cable at the
distributor cap between the spark plug cable of cylinders # 1 and # 3
CAUTION: SPARK PLUG CABLES MUST NOT TOUCH TOGETHER. ENSURE SUFFICIENT DISTANCE BETWEEN SPARK PLUG
CABLES.
^
After ignition coil cable installation, adjust the holding clip so the ignition coil cable does not come in contact with any components
^
The vacuum hose that is routed behind the ignition coil must be rerouted to the front of the ignition coil as follows:
- Disconnect the vacuum hose from the brake booster vacuum line, route the hose in front of the coil and in such a way that the hose does not touch
any engine components
- Reconnect the vacuum hose to the brake booster vacuum line
- Remove the present brake booster vacuum hose securing clip close to the brake booster and discard
- Install new clip from the kit on the brake booster vacuum line and secure the other vacuum line in the clip according to -C- in the illustration
(accelerator cable is no longer guided by a holding clip)
Discard all removed parts.
Parts Information
We will automatically ship to you an initial supply of the following parts, according to your vehicle allocation:
Description
Part Number
Application
