Golf III L4-2.0L (ABA) (1995)
Vehicles with A/C
Observe additional information and procedure steps below
CAUTION:
DO NOT open A/C refrigerant circuit. To prevent damage to condenser and to refrigerant lines/hoses, DO NOT stretch or kink them.
-
Remove Air Cleaner (ACL). Refer to Powertrain Management, Fuel Delivery and Air Induction, Air Cleaner Housing See: Engine/Tune-up and
Engine Performance Checks/Air Cleaner Housing
-
Remove both radiator mounting bolts.
-
Remove retaining clamps from A/C refrigerant lines.
-
Separate condenser from radiator and pull it forward as far as possible.
-
Remove radiator between condenser and lock carrier (radiator support)
Installing
Install in reverse order of removal, noting the following:
Cooling system refill. Refer to Cooling System, Service and Repair, Drain and Fill (Refill) Cooling System. See: Service and Repair