GTI L4-2.0L Turbo (BPY) (2007)
Hydraulic Control Assembly - Antilock Brakes: Locations
ABS Mark 60 (ABS/EDL/ASR/ESP)
ABS Mark 60 (ABS/EDL/ASR/ESP)
1. ABS control module J104
Separation from control module and hydraulic unit is not possible on vehicles with hydraulic brake booster or hill assist.
2. ABS Hydraulic Unit N55
Separation from control module and hydraulic unit is not possible on vehicles with hydraulic brake booster or hill assist.
3. Brake line
^
Master brake cylinder/primary piston circuit to hydraulic control unit
^
Identification: Dia. 6.5 mm and tube fitting with longer thread M12 x 1
4. Brake line
^
Master brake cylinder/secondary piston circuit to hydraulic unit
^
Identification: Dia. 6.5 mm and tube fitting with longer thread M12 x 1
5. Brake line
^
To left front brake caliper
^
Identification: Dia. 5.25 mm and tube fitting with shorter thread M12 x 1
6. Brake line
^
To right front brake caliper
^
Identification: Dia. 5.25 mm and tube fitting with thread M10 x 1
7. Brake line
^
To left rear brake caliper
^
Identification: Dia. 5.25 mm and tube fitting with shorter thread M12 x 1
8. Brake line
^
To right rear brake caliper