GTI L4-2.0L Turbo (BPY) (2007)
Air Door Cable: Service and Repair
Air Distribution Control - Flexible Cable, Removing and Installing
Air Distribution Control - Flexible Cable, Removing And Installing
Removing
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Remove radio.
-
Bring flexible shaft into the following position:
-
Rotate air distribution rotary switch -1- long enough until shaft locking mechanism -2- is visible in step-up gearing -3-.
-
Remove heating and A/C controls
-
Carefully pull out adapter.
-
Press in retaining tab -arrow- and remove flexible cable.
Installing:
Install in reverse order of removal, ensuring air distribution rotary control knob has not been moved from the positions as specified for removal.
NOTE:
-
When installing flexible cable, adapter and rotary switches on heating and ventilation controls must be oriented in a specific manner.