GTI L4-2.0L Turbo (BPY) (2007)
Tail Lamp: Service and Repair
Taillamps, Vehicles, From 11.05, Replacing
Taillamps, Vehicles 11.05, Replacing
Special tools, testers and auxiliary items required
-
Torque screwdriver V.A.G 1624
NOTE: On vehicles from November 2005, an adjustment element is installed which can be used to adjust the flush dimension to the bumper trim. Since
November 2005, only Tail lamps that require this adjustment element are offered. Therefore, when a new lamp is installed, it is necessary to install an
adapter on the lamp that can recreate the difference to the plate. This adapter is not adjustable.
-
Remove old Tail lamps.
-
The adapter is installed in the area marked in the picture.
-
Install adapter -2- on new Tail lamp -1- as shown.
-
Tighten mounting bolt -3- to specified tightening torque.
-
Install new Tail lamp.