GTI L4-2.0L Turbo (CBFA) (2008)
Turn Signal Switch: Service and Repair
Turn Signal Switch
CAUTION: The removal and installation of individual steering column switch components must be done in the specified sequence.
NOTE:
-
Turn signal switch" consists of the components Turn Signal switch E2, Headlamp Dimmer/Flasher Switch E4 and depending on equipment (CCS)
Cruise Control Switch E45.
-
For reasons of clarity, steering column switches with Cruise Control Switch E45 are depicted as removed in the illustration.
Removing
-
Release retaining clips - arrows - using a 1.0 mm feeler gauge - 1 - and remove "turn signal switch" toward rear (toward rear of vehicle).
Installing
Install in reverse order of removal, noting the following:
NOTE: "Turn signal switch" must engage audibly.