Jetta GLX Wagon V6-2.8L (AFP) (2001)
-
Disconnect connector -1- from throttle control unit -2.
-
Unscrew ground connection at throttle control unit (J338).
-
Open and close balancing reservoir sealing cover to allow pressure to escape from cooling system.
-
Remove coolant hoses -1- and -2 from throttle control unit and plug hose ends.
-
Unclip fuel lines at cylinder head cover.
-
Disconnect vacuum connectors arrows-.
-
Unclip secondary air pump inlet line and all other lines out of brackets at top half of intake manifold.
-
Unscrew dipstick duct at top half of intake manifold.
-
Now unscrew two intake manifold support screws.
-
Remove vacuum hose at intake manifold switching vacuum actuator.