Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
/Page-2035033.png)
^
Apply thin coat of assembly lubricant G 052 150 A2 to threads before installing
3- Dust cap
4- Guide pins
^
Grease before pulling on protective cap
5- Protective cap
^
Pull onto brake carrier and guide pin
6- Brake carrier with guide pin and protective cap
^
Replacement part is assembled with sufficient grease on guide pins
^
If protective caps or guide pins are damaged, install repair kit. Use grease packet supplied to lubricate the guide pins.
