Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
-
Loosen ribbed belt by turning tensioner in direction of -arrow-.
-
Block tensioner with mandrel T10060 or equivalent.
-
Remove ribbed belt.
Installing
CAUTION:
-
Note previously marked running direction of ribbed belt when reinstalling.
-
Before installing ribbed belt, make sure that all subassemblies (generator, a/c compressor, etc.) are securely mounted and turn freely.
-
When installing belt, ensure correct seating in the belt pulleys.
-
Install ribbed belt according to routing diagram.
-
Remove mandrel T10060.
-
Start engine and check belt running.
-
Install engine cover.
-
Install center and right sound insulation.
Ribbed Belt, Routing
Ribbed Belt, Routing
4-Cylinder TDI - PD engine
1. Tensioning roller
2. Pulley - generator