Jetta Sedan L5-2.5L (BGP) (2005)
-
From engine compartment, remove bolts (12 Nm) - 1 - for refrigerant lines - 2 -.
-
Disconnect refrigerant lines from expansion valve - 3 -.
CAUTION:
-
Always plug open refrigerant line connections to prevent dirt and moisture contamination.
-
Where applicable, use sealing caps from replacement expansion valve.
-
Cover floor carpet in vehicle interior with leak-proof foil and absorbent paper.
NOTE: Observe screw position, length and orientation during removal.
1. Screw
-
4 Nm
2. Screw
-
Qty. 2
-
4 Nm
3. Cable bracket
4. Heating and A/C unit