Jetta Sedan L5-2.5L (BGP) (2005)
-
Guide the nozzle of the hot air gun onto the shear bolts.
-
Switch on the heat gun and heat the bolt for approximately 20 to 25 seconds.
-
Remove the shear bolt using pliers on the head.
The procedure for the second shear bolt is exactly the same.
‹› If the bolts cannot be removed, cut into the heads so two parallel surfaces are formed - arrows - and then remove them using a screwdriver.
-
Insert a screwdriver - A - between the protective housing and retaining plate - arrow -.
-
Pry the protective housing upward using the screwdriver - A - and pull it off sideways from the retaining plate - arrow -.