Jetta Sedan L5-2.5L (CBTA) (2009)
Front Door Panel: Service and Repair
Passenger Door Trim
Passenger Door Trim
Removing
-
Switch off ignition.
-
Pry upper section of grip shell - 1 - out of pull handle in door trim using wedge 3409.
-
Remove bolts - 2 - and - 3 - (1.5 Nm).
-
Remove screw - 3 - and three screws - 4 - (2 Nm).
-
Disengage door trim from mounts in lower area using disassembly pliers 3392.
-
Disengage door trim from mounts on the sides using disassembly pliers 3392.
-
Pull door trim vertically upward out of window shaft seal.
-
In vehicles with radio system, disconnect wiring harness from loudspeaker.
-
Disconnect door trim wiring harness from door control module.
-
Disengage release - 6 - from interior door mechanism - 7 -.
-
Remove bolt - 8 - (2 Nm) and pry cover of mirror triangle - 9 - out of mounts using Trim Removal Wedge 3409.
-
In vehicles with radio system, disconnect wiring harness from loudspeaker in cover.