Jetta Sedan L5-2.5L (CBTA) (2009)
Suspension Spring ( Coil / Leaf ): Service and Repair
Shock Absorber and Coil Spring Assembly Overview
Shock Absorber and Coil Spring Assembly Overview
1
Upper spring support
2
Coil spring
‹› Note different suspension versions, refer to --> [ Vehicle Data Label ] See: Alignment/Service and Repair/Vehicle Data Label.
‹› Removing and installing, refer to --> [ Coil Spring ] See: Coil Spring.
3
Lower spring support
‹› Spring end rotated up to stop.
4
Bolt, 180 Nm
‹› M14 x 1.5 x 70.
5
Bolt, 50 Nm + 45° additional turn
‹› Always replace after removal.
6
Shock absorber
‹› Removing and installing, refer to --> [ Shock Absorber ] See: Suspension Strut / Shock Absorber/Service and Repair/Removal and
Replacement/Rear Suspension/Shock Absorber.