Jetta SportWagen L4-2.0L DSL Turbo (CBEA) (2009)
/Page-1313004.png)
‹› There must be a distance - a - of at least 10 mm between the engine bracket and right longitudinal member.
‹› The casting edge on the engine bracket - 2 - must be parallel to the support arm - 1 -.
Manual Transmission
-
On transmission side, edges of support arm - 1 - and transmission mount - 2 - are parallel.
‹› Dimension - x - same size on both sides of bracket.
DSG Transmission
-
On transmission side, edges of support arm - 1 - and transmission mount - 2 - are parallel.
