Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Window Frame Trim, Wagon
Rear Lid Trim
Window Frame Trim, Wagon
Removing
-
Remove rear lid trim. Refer to --> [ Rear Lid Trim, Wagon ] See: Rear Lid Trim, Wagon.
-
Using Pliers (3392), loosen the sides of the trim - 1 - from the mounts in the rear lid - 2 -.
-
Pull trim on upper edge out of mounts.
Installing
To install, perform the steps used for removal in reverse order.
‹› Before installing, check securing clips for damage and replace if necessary.