Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
Trunk / Liftgate Latch: Service and Repair
Rear Lid, Wagon
Rear Lid Lock
Removing
-
Remove the rear lid trim.
-
Loosen connector - 3 - on rear side of lock.
-
Remove screws - 2 - and remove lock - 1 - from rear lid.
In case of an electrical fault, rear lid can be opened at emergency release - 4 -. The emergency release is reached through an opening in the rear lid
trim.
Installing
-
Secure connector - 3 - on rear side of lock.
-
Insert lock - 1 - in rear lid and tighten screws - 2 -, tightening specifications: 24 Nm.
-
Install the rear lid trim.
‹› Before the rear lid is closed, a function test of the unlocking components must be performed.