New Beetle L4-1.8L Turbo (AWV) (2005)
Lock Carrier: Service and Repair
Front End, Assembly Overview
Front End, Assembly Overview
NOTE:
-
The front fenders and the front bumper cover can only be removed together from the vehicle, as the so named Front part.
-
The front part must be installed free of stress.
1. Front part
-
Removing:
-
Remove wheel housing liners.
-
Disconnect connectors for turn signals and fog lights.
-
Disconnect hose connector in vehicles with headlight washer system.
-
Pull front part on left and right-hand sides outward off the threaded studs and remove forward with the aid of two technicians.
-
Installing:
2. Bolt
-
With nut
-
6 Nm
3. Combi-bolt/screw
-
6 Nm
4. Bolt
-
Qty. 18
-
7.5 Nm
-
Insert with locking fluid D 185 400 A2
-
Note tightening sequence
5. Insulation
6. Hexagon nut
-
6 Nm
7. Bolt
-
7.5 Nm