New Beetle L4-1.8L Turbo (BNU) (2005)
-
Then, always check dimension - a - at left and right side from rear.
-
The 0-line on roof symbolizes the horizontal position (zero position) of the vehicle.
-
If necessary, correct the existing difference.
-
At the front axle, it can be compensated by applying weights on to corresponding suspension strut dome in engine compartment.
-
At the rear axle, it can be compensated by applying weights in luggage compartment on the corresponding vehicle side.
-
For example, sand bags of approximately 10 kg are suitable as weights.
Vehicle Data Sticker
Vehicle data sticker
Explanation of the PR.-No. on vehicle data sticker
Different suspensions are installed depending on engine version and equipment. These are identified by PR numbers.
Suspension version installed in vehicle is indicated by the corresponding PR. No. for the front axle on the vehicle data sticker.
Example of a vehicle data sticker
In this example the vehicle has basic suspension G16 - arrow - installed.
The PR. No. can also be e.g. G18, G80 etc.
Vehicle data plate is located in spare tire well and in service book.
PR. numbers are decisive for the allocation of specified values to the vehicle.
Front Axle Caster & Camber, Adjusting
Front axle toe, adjusting
Special tools, testers and auxiliary items required as weights.