New Beetle L4-2.0L (AVH) (2005)
Fluid - A/T: Service and Repair
ATF Level, Topping Up
ATF level, topping up, 09G, 6 Spd. A/T
If no ATF leaks out of overflow pipe - arrow2 - before ATF temperature reaches 40°C, top up the ATF level.
Note: Reinstall the ATF control plug at the latest before the temperature reaches 45°C (50°C for hot climates). If necessary switch off the engine,
allow the transmission to cool down and repeat the check.
CAUTION:
-
When working in the vicinity of the radiator, ensure sufficient clearance is left for the radiator coolant fan.
-
The radiator coolant fan can switch on without prior warning.
-
Pry off plug securing cap - arrow - with a screwdriver. Cap locking device will be damaged when removing, therefore always replace cap.
-
Pull plug out of filler pipe.
-
Fill with ATF using ATF filler tool V.A.G1924 until ATF runs out of level hole.
CAUTION: An insufficient filling with ATF as well as filling to excess affects the function of the transmission.