New Beetle L4-2.0L (AVH) (2005)
/Page-561002.png)
-
Tighten ATF control plug - arrow 1 - (with a new seal) to 27 Nm. ATF check is now completed.
Note: Reinstall the ATF control plug at the latest before the temperature reaches 45°C (50°C for hot climates). If necessary, allow the transmission
to cool down and repeat the check.
-
Switch off ignition.
-
Install plug to filler pipe and secure with a new cap - arrow -.
-
Lock cap.
CAUTION: Always replace the cap. The cap secures the sealing plug.
-
End function "08 - Read measured value data block" by touching key.
-
Tip on function "06 - End output".
-
Switch off ignition and disconnect diagnosis cable.
-
Install sound insulation.
