New Beetle L4-2.0L (AVH) (2005)
Continuation for completing installation of toothed belt
-
Install middle and lower toothed belt guard.
-
Install vibration damper/belt pulley.
-
Tightening torque: 25 Nm
-
Install engine bracket to cylinder block.
-
Tightening torque: 45 Nm
Note:
^
Insert the engine bracket bolts into the bracket before installing it.
^
Before installing the assembly mounting, all engine mounting bolts must be tightened to the prescribed torque.
-
Install engine assembly mounting complete.
-
Align engine and transmission mountings.
-
Prescribed tightening torques for assembly mounting: Assembly mountings
-
Remove Engine support bridge 10-222A.
-
Install toothed belt guard upper part.
-
Install poly V-belt tensioner.
-
Tightening torque: 25 Nm
-
Install Poly V-belt.
-
Install coolant expansion tank.
-
Install right side sound insulation.
-
Install engine cover.