New Beetle L4-2.0L (AVH) (2005)
Fuel Gauge Sender: Locations
Fuel Tank With Attachments And Fuel Filter, Removing And Installing (Vehicles With Engine Code AEG, AVH, AZG, BEV, BGD)
1. Cap
2. Seal
-
Replace if damaged
3. Mounting screw
4. Tank lid unit
-
With rubber cap
5. 10 Nm
6. Ventilation line
-
Check for secure fit
7. Change-over valve
-
To remove, unclip valve sideways from connection
-
Before installing, remove cap.
-
Checking, see below Fig. 2
8. Seal
-
Replace if damaged
9. Ventilation line
-
Check for secure fit
-
To EVAP canister
10. Ventilation line
-
Check for secure fit
-
To disengage, squeeze together at front
-
To EVAP canister.
11. Wire routing
-
in longmember
12. Ventilation line
-
Check for secure fit
-
Clipped in at fuel tank