New Beetle L4-2.0L (AZG) (2003)
Marker Lamp Bulb: Service and Repair
Front Turn Signal and Side Marker Light Bulb, Replacing
Front Turn Signal and Side Marker Light Bulb, Replacing
Removing
-
Remove turn signal lights and side marker lights.
-
Turn bulb holder in direction shown -arrow- and pull out from housing.
-
Remove bulb from holder.
Installing
CAUTION: Do not touch the glass portion of the bulb with bare hands. The moisture and/or grease from fingers that evaporates on the bulb during
operation, can cause the glass to cloud over.
-
Install in reverse order of removal.
-
When installing, make sure bulb holder engages in housing by turning in opposite direction to direction shown -arrow-.