New Beetle L4-2.0L (BEV) (2004)
Torque Converter: Service and Repair
4 Speed Automatic 01M
Draining
TORQUE CONVERTER DRAINING
Required special tools and equipment:
Oil extractor VAG 1358 A (or equivalent)
If the torque converter has become contaminated by wear or when completely overhauling the transmission, drain the torque converter as follows:
Extract ATF from torque converter using VAG 1358 A and probe VAG 1358 A/1 or equivalent.
Sleeve Bearing From Turbine Shaft
Removing sleeve bearing from turbine shaft
Place transmission in its installation position on oil pan.
-
Remove torque converter.
-
Position holes -A- of turbine shaft in horizontal position.