New Beetle L5-2.5L (BPR) (2007)
-
Remove the wiring harness - 3 - from the transport strap.
-
Pull all clamps - 4 - and retaining ring - 5 - from the locking mechanism.
-
Remove bolts - 7 - and remove the transport strap.
-
Remove the throttle valve control module (J338 ). Refer to => [ Throttle Valve Control Module ] See: Powertrain Management/Fuel Delivery and
Air Induction/Relays and Modules - Fuel Delivery and Air Induction/Variable Induction Control Module/Service and Repair. The coolant hoses
remain connected, if equipped.
‹› Coolant hoses are only for a throttle valve control module heated by coolant
-
Disconnect the connector - 1 - and hose for the crankcase ventilation - 3 -.
-
Remove the wiring harness - 2 -. To do so, carefully press off clips - arrows -.
-
Bring the lock carrier into service position. See: Body and Frame/Lock Carrier
-
Support lock carrier using a sleeve - B -, 80 millimeters (mm) in length, for example, from (VW 540/1 A) and a M8 x 100 bolt - A -.