New Beetle L5-2.5L (BPR) (2007)
1
Power steering test unit (V.A.G 1402)
2
Hose of pressure gauge (V.A.G 1402)
3
Hose from adapter set (V.A.G 1402/6)
4
Adapter (V.A.G 1402/1 A)
5
Seal
6
Adapter (V.A.G 1402/2)
7
Pressurized line with ring connection
8
Banjo fitting
-
Remove hose clamps up to 25 mm dia. (3094) from intake line and return line.
-
Start engine and top off fluid level in reservoir if necessary.
-
Turn steering wheel from stop to stop approximately 10 times.
-
Check pumping pressure.
Test Requirements
‹› Ribbed belt/ribbed belt tension OK.
‹› Sealing of system