New Beetle L5-2.5L (BPS) (2006)
/Page-1609005.png)
‹› If magnets are not on cover strips, replace cover strips.
-
Insert cover strip - 2 - into lower section of frame - 3 -.
-
Install upper section of frame - 1 - onto lower section of frame.
-
Carefully engage upper and lower sections of frame to each other - arrows -.
‹› Replace the frame if the retaining tabs are damaged.
-
Install cover => [ Selector Mechanism Cover and Circuit Board ] See: Removal and Replacement/Selector Mechanism Cover and Circuit Board.
