New Beetle L5-2.5L (BPS) (2006)
Wiper Arm: Service and Repair
Windshield Wiper System
Windshield Wiper System
=> [ Windshield Wiper System ]
=> [ Wiper Blade ]
Windshield Wiper System
Special tools, testers and auxiliary items required
‹› Torque Wrench (VAG 1331)
CAUTION!
Disconnect the battery (A) before working on the electrical system. Refer to => [ Battery A, Disconnecting and Connecting ] See: Starting
and Charging/Battery/Service and Repair/Procedures/Battery A, Disconnecting and Connecting.
‹› Get the radio anti-theft code before disconnecting the battery (A)
‹› After connecting the battery (A), check any affected system or component (radio, clock, comfort electrical connection etc.) according to the repair
information and/or the operating instructions.
Wiper Arms, Removing
‹› In order to remove the wiper frame and linkage and the Windshield wiper motor (V) it is necessary to first remove the wiper arms and the cowl
panel trim and to loosen the plenum chamber separator.
‹› Before removing wiper arms, make sure Windshield Wiper Motor (V) is in rest position. Only in this way can the end position for the wiper arms
be adjusted correctly when installed.
-
Pry off covers - arrows - using a screwdriver.