volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

Procedures|Page 13798 > < Procedures|Page 13796
Page 25
background image

‹› 1.5 Nm

6 - Trim

‹› Do not paint!

7 - Lid Module Main Frame

‹› Suitable for all components listed here.

‹› Removal: First remove bolt - 2 - from the side trim. 

8 - Release Cable

For vehicles with power operated convertible without large flap base and flap servomotor from 06.04 to 11.04, flap servomotor is installed on right
side of luggage compartment, meanwhile control head for convertible was modified for this function.

Small Trim, Adjusting

Pillar and Side Trims, Convertible

Small Trim, Adjusting

Large and small trim borders may have different gap dimensions with respect to side trim borders.

-

Gap dimensions - C -, - D - should be between 3.5 and 4.5 mm to avoid jamming or damaging when opening or closing the trims.

The small trim may show a different height with respect to the side trim.

-

Height - B - should be same height as side trim to avoid jamming or damage when opening or closing trim.

Procedures|Page 13798 > < Procedures|Page 13796