New Beetle Convertible L5-2.5L (BPR) (2007)
The rest of the installation follows the reverse of the removal procedures.
Tightening Specifications
Crankshaft, Locking to Check/Adjust Valve Timing
Crankshaft, Locking to Check/Adjust Valve Timing
-
Remove the cylinder head cover. Refer to => [ Cylinder Head Cover ] See: Cylinder Head Assembly/Valve Cover/Service and Repair.
-
Perform the same work steps as for "Crankshaft, Locking". Refer to => [ Crankshaft, Locking ] See: Crankshaft, Locking.
‹› If the threaded holes in the camshafts - arrows - do not point upward, the crankshaft must be rotated one rotation (360°) in the direction of engine
rotation.
In order to be able to precisely check and adjust valve timing, always note the following: