New Beetle GLS L4-1.8L Turbo (AWV) (2001)
NOTE: Do not reuse clips -2-. Always replace after releasing.
2.0L - 4-cylinder normally aspirated engine
-
Pry out caps -arrows- and release fasteners underneath.
-
Remove nut -1-.
-
Pull dipstick out.
-
Remove engine cover.
1.8L - 4-cylinder turbocharged engine
-
Pry out cap -1- and remove nut underneath -2- (tightening torque: 7 Nm)
-
Pull cover out from retainers
-
Remove engine cover.
Continued for all
-
Mark direction of rotation of ribbed belt if it is to be reused.
-
Loosen ribbed belt by turning tensioner in direction of -arrow-.