| –
| Loosen AF 5.5 mm nut -3-. Release lever is detensioned. |
| –
| Screw in door lock. By doing this, tolerance compensation is given between release lever and relay lever. |
| –
| Tighten nut -3-, 2,4 Nm (left side: right-hand thread, right side: left-hand thread). To do this, use torque wrench -V.A.G 1783- and ring spanner insert AF 5.5 -V.A.G 1784-. |
| –
| Carry out adjustment procedure each time door handle or door lock is installed and then check function. |
|
|
|
