volkswagen Workshop Repair Guides

Volkswagen Workshop Service and Repair Manuals

ABOUT US
Installing rear window > < Removing broken rear window

Passat (B3)

Removing undamaged rear window
Removing undamaged rear window
   
–  Set reel device -V.A.G 1654- (from -V.A.G 1474 A-) to position 1.
–  Attach cord ends (yellow) to reel device.
–  Move reel device to respective individual positions and cut window free to position 3.
–  Cut free position 4 with other cord end.
  V64-0200
–  Cut free remaining adhesive, positions 1-3.
–  Cut free positions 4 and 5 with other cord end.
  Note
If window cannot be taken out of aperture - adhesive has escaped from cord channel to outside - remaining adhesive should be cut off using a piece of cutting cord and two grips to prevent damage to the paintwork. Always guide cutting cord under window surround.
  V64-0201

Installing rear window > < Removing broken rear window