| –
| Cut through RIR across roof. |
| –
| Cut RIR into strips of approx. 100 mm. |
| –
| Pull off strips, starting from centre, individually from roof. When doing this, support roof with one hand. |
WARNING | If when cutting with carpet knife the paintwork becomes damaged, the area must be primed with 1-pack anti-corrosion primer -ALN 002 003 04-. |
|
| –
| Any remains of paper on roof can be pulled off by heating with hot air gun and/or scraped off. Only small remains of paper need not be removed. |
WARNING | The temperature on the roof must not exceed 100 °C, otherwise the paint finish will be damaged. |
|
|
|
|
