|
Servicing shift mechanism
Checking shift mechanism
Selector lever in "P" position and ignition switched on:
-
● Brake pedal not depressed:
- Selector lever is locked and cannot be shifted out of "P" position. Solenoid for selector lever lock blocks selector lever.
- Solenoid for selector lever lock releases selector lever. It is possible to shift into a driving gear.
Selector lever in "N" position and ignition switched on:
-
● Brake pedal not depressed:
- Selector lever is locked and cannot be shifted out of "N" position. Solenoid for selector lever lock blocks selector lever.
- Solenoid for selector lever lock releases selector lever. It is possible to shift into a driving gear.
-
◆ The starter must not operate in the selector lever positions "1", "2", "3", "D" and "R".
-
◆ On right-hand drive vehicles the starter must only operate in selector lever positions "P" and "N" when the locking button in the selector lever handle is not pressed.
-
◆ When travelling at speeds above 5 km/h and shifting into selector lever position "N", solenoid for selector lever lock must not engage and block selector lever. Selector lever can be shifted into a driving gear.
-
◆ When travelling at speeds below 5 km/h (almost stopped) and shifting into selector lever position "N", solenoid for selector lever lock must not engage until after approx. 1 sec. Selector lever cannot be shifted out of "N" position until brake pedal is depressed.
|
