Passat (B3)
| Removing and installing power steering vane pump (vehicles with 16V engine) |
Note| t | Always renew self-locking nuts and bolts. |
| t | Pumps supplied as replacement parts are not filled with fluid. Therefore it is essential to fill pump with hydraulic fluid -G 002 000- and to rotate pump by hand. Otherwise pump may be noisy during operation. |
| t | Do not reuse drained hydraulic fluid. |
| 1 - | Suction hose |
| 2 - | Pressure hose |
| 3 - | Hose clip |
| 4 - | Clamping bolt |
| q | Tensioning V-belt → Item. |
| 5 - | 25 Nm |
| 6 - | Swivel arm, front |
| 7 - | Adjustment bracket |
| 8 - | Bracket |
| 9 - | V-belts |
| q | Size: → Item. |
| q | Tightening → Booklet27. |
| q | Check tension using thumb pressure - 5 mm deflection. |
| 10 - | 25 Nm |
| 11 - | V-belt pulley |
| q | When installing, V-belt pulleys for crankshaft, coolant pump and vane pump must align. |
| 12 - | 25 Nm |
| 13 - | Swivel arm, rear |
| q | Install mounting is stress free. |
| 14 - | Vane pump |
| q | Checking delivery pressure → Chapter. |
