Passat Sedan V6-3.6L (BLV) (2008)
connection is damaged, the vibration damper must be replaced.
-
Clean the threads in the crankshaft with a M18 x 1.5 tap.
-
Install new vibration damper bolt.
-
Lock the vibration damper using (T10069).
-
Tighten the new bolt using (V.A.G 1601).
Tightening specification: 100 Nm + 180° (1/2) additional turn.
‹› Turning the additional 180° may be performed in several stages.
-
Install the ribbed belt. Refer to => [ Ribbed Belt ] See: Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair/Ribbed Belt.