Passat Sedan V6-3.6L (BLV) (2008)
Idler Pulley: Service and Repair
Ribbed Belt Pulley Without Freewheel, Removing and Installing
Ribbed Belt Pulley Without Freewheel, Removing And Installing
Special tools, testers and auxiliary items required
-
Socket VAS 3310
-
Torque wrench VAG 1332 (or 40 - 200 Nm equivalent)
Removing:
-
Remove generator.
-
Tighten the generator in a vise at the attachment points.
-
Use socket insert VAS 3310 to remove nut from generator shaft.
Installing
Install in reverse order of removal, noting the following:
-
Torque all fasteners according to value in table.