Passat Sedan 4Motion V6-2.8L (ATQ) (2003)
/Page-2091001.png)
Rear Door Panel: Service and Repair
Rear Door Trim, Removing And Installing
Removing
-
Switch ignition off.
NOTE: Place scraping blade - 2 - or similar tool between screwdriver and door trim to avoid damage on door trim.
-
Insert screwdriver (max. 5 mm wide) into hole on underside of inside door handle - arrow -, rotate and pry out panel - 1 -.
-
Remove bolts - 1 - and - 2 -.
NOTE: Inside door handle - 3 - is bolted to door trim and can only be removed when door trim is removed.
