Passat Sedan 4Motion V6-2.8L (ATQ) (2003)
Tail Lamp: Service and Repair
Rear Light Bulb Holder - Wagon, Removing and Installing
Rear Light Bulb Holder - Wagon From 10.00, Removing And Installing
Removing
-
Switch off all electrical consumers, switch off ignition and remove ignition key.
-
Open rear light side storage flap.
-
Disconnect electrical connector.
-
Depress retainer tabs -arrows- and remove bulb holder to rear.
-
To remove turn signal bulb, turn socket counterclockwise -arrow-.
Installing
Install in reverse order of removal.