Passat Sedan 4Motion V6-2.8L (ATQ) (2003)
-
Unscrew hex bolt -5-.
-
Unscrew hex nuts -3- and -4- and take out coupling link.
-
Remove hex nut -2- for track-control link on subframe and take out hex bolt.
-
Remove hex bolt -1-.
-
Unscrew hex bolts -arrows- from transmission mounting -1-.
Vehicles with all wheel drive
-
Unbolt propshaft from transmission.
Continued for all vehicles
-
Place transmission jack VAG 1383 A with 1359/2 under subframe and exert slight counter pressure.
-
Unscrew bolts -1- and -2- at rear of subframe on both sides of vehicle.
A - Block of wood
-
Using transmission jack VAG 1383A, lower subframe slightly.
-
Remove hex bolts for control arm and guide control arm.
-
Disconnect ABS vehicle speed sensor wiring out of retainer on brake caliper.